AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc
6LcpywkUAAAAAJ1-KJYsxb57uYQhMX6hpD1zayJA

KILZ® ORIGINAL Interior Water-Based Primer No. L2003

Avg. Rating:

Designed to deliver the same heavy stain blocking, smooth flow and leveling, sandability, and excellent adhesion as our KILZ Original Interior Oil-Based Primer while bringing the convenience of a water base such as low odor, low VOC’s and easy soap and water clean-up! KILZ Original Water-Based Primer blocks tough stains such as water, tannin, smoke, nicotine, grease marker and more. Dries fast in 1 hour and sands easily in as little as 2 hours after application. It can be used for a wide variety of interior surfaces and works well with water-based or oil-based paints. Not suitable for areas prone to mold and/or mildew or as a primer for floor coatings.


Only available in select stores. CLICK HERE for store list.

Technical Data Sheets

Safety Data Sheets

Finish

85° = < 10.0. Sheen levels depend on porosity and various surface irregularities.

Best for use in

Interior surfaces including wood, drywall, plaster, masonry, brick, MDF, concrete, clean ferrous and non-ferrous metal, galvanized, aluminum and properly prepared glossy surfaces. Not recommended for mold or mildew-prone surfaces or on flooring.

Coverage

300 - 400 Sq. Ft. per Gallon depending on the surface texture, porosity and application method. It does not include the loss of material from spraying.

PRODUCT USAGE
  • Use on wood, drywall, plaster, masonry, brick, MDF, concrete, clean ferrous and non-ferrous metal, galvanized, aluminum, and properly prepared glossy surfaces.
  • Not recommended for mold or mildew-prone surfaces or on flooring.

Surface Preparation

  • All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew, loose peeling paint, rust and all other foreign substances.
  • If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry.
  • Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead is hazardous.*
  • Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before priming.*
  • Mold or Mildew Covered Surfaces: Do not use. Mold and/or mildew must be completely removed first with a mildew remover. Surface must be cleaned, allowed to dry and assured to be mold and/or mildew free before applying.
  • Masonry, Brick, Stucco and Plaster: KILZ ORIGINAL WATER-BASED Primer may be used on clean, dry, aged interior masonry surfaces that have cured (dried) at least 30 days.
  • Fire Restoration: It is critical to clean and repair damaged surfaces thoroughly before priming.

* WARNING If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Center at 1-800-424-LEAD or log on to www.epa.gov/lead.

Read More

Application

  • Eye protection is recommended. For spray applications, a small amount of water (no more than 1/2 pint per gallon) may be added. Do not thin for stainblocking applications.
  • Only apply if surface, air and product temperatures are between 50°-90°F. Stir thoroughly before and occasionally during use. Apply using a brush, roller or sprayer.
  • Brush – High quality Nylon/Polyester.
  • Roller – High quality 3/8-1/2" nap on smooth surfaces or 1/2-3/4" nap on semi-rough or porous surfaces.
  • Airless spray – .015-.019 tip / 60 mesh filter
  • Prime the entire surface to ensure a uniform appearance of the topcoat.
  • Stainblocking: After priming, test for stain bleed-through by applying the topcoat to a small section. Allow the primer to dry longer for heavier stain-blocking. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area.
  • Coverage: 300 - 400 sq. ft. (27.87 - 37 m2) per gallon depending on application method and surface porosity.

Read More

Dry Time

  • 77°F (25°C) / 50% RH: Touch in 30 minutes.
  • Paint in 1 hour.

Read More

Disposal

  • Clean equipment and paint spatters with warm, soapy water.
  • Do not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.
  • If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. For recycling or disposal information contact your local household refuse collection service.

Read More

Read More

WARRANTY

LIFETIME LIMITED WARRANTY: Masterchem Industries LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Masterchem Industries LCC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

To obtain warranty service, call 1-866-774-6371. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot