AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

Technical Data Sheets

Safety Data Sheets

Product Certifications & Declarations

Finish

Sheen levels depend on porosity and various surface irregularities.

Best for use in

Use on interior and exterior surfaces including woodwork, drywall, plaster, paneling, masonry, brick, painted metal and properly prepared glossy surfaces†. Use under or over water-based or oil-based paints. Not recommended on flooring.

Coverage

300 - 400 Sq. Ft./Gal. depending on the surface texture, porosity and application method. It does not include the loss of material from spraying.

PRODUCT USAGE
  • Clock icon

    30 Min Dries to Touch

    1 HR Ready to Topcoat

  • Paint coverage icon.

    300-400 Sq. Ft 
    Coverage per Gallon

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

  • Use on interior and exterior surfaces including woodwork, drywall, plaster, paneling, masonry, brick, painted metal and properly prepared glossy surfaces†.
  • Use under or over water-based or oil-based paints.
  • Not recommended on flooring.

Preparation

  • All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew, loose peeling paint, rust and all other foreign substances.
  • If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry.
  • Unpainted, exterior wood exposed to sun and/or moisture longer than 2-4 weeks must be cleaned and sanded before priming.
  • †Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before priming.* Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface.*
  • Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming.
  • Masonry, Brick, Stucco and Plaster: KILZ 2 ALL-PURPOSE Primer may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ 2 ALL-PURPOSE Primer.
  • Fire Restoration: It is critical to clean damaged surfaces thoroughly before priming. Primer recommendations: Water-based primers such as KILZ® RESTORATION or oil-based primers such as KILZ® ORIGINAL (interior use) or KILZ® ORIGINAL EXTERIOR.

Read More

Application

  • Eye protection is recommended. For spray applications, a small amount of water (no more than 1/2 pint per gallon) may be added.
  • Do not thin for stainblocking applications. Only apply if surface, air and product temperatures are between 50°-90°F (10°-32°C).
  • Stir thoroughly before and occasionally during use.
  • Brush – High quality Nylon/Polyester.
  • Roller – High quality 3/8-1/2" nap on smooth surfaces or 1/2-3/4" nap on semi-rough or porous surfaces.
  • Airless spray – .017-.021 tip / 60 mesh filter.
  • Prime the entire surface to ensure a uniform appearance of the topcoat.
  • Stainblocking: KILZ 2 ALL-PURPOSE Primer is formulated to block light or medium stains. For heavy stains use oil based primers such as KILZ® ORIGINAL and KILZ® ORIGINAL EXTERIOR or water based primers such as KILZ® RESTORATION and KILZ® PREMIUM.
  • Tinting: KILZ 2 ALL-PURPOSE Primer may be tinted with up to 2 ounces of universal colorant per gallon. Tinting to a lighter shade than the topcoat is recommended. Coverage: 300-400 sq. ft. (27.87-37 m²) per gallon depending on application method and surface porosity.
  • Application at lower temperatures, in high humidity or in poorly ventilated areas will affect dry time.
  • Dry Time @ 77°F (25°C) / 50% RH: Touch 30 minutes. Paint in 1 hour

Read More

Disposal

  • Clean equipment and paint spatters with warm, soapy water.
  • Do not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.
  • If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. For recycling or disposal information contact your local household refuse collection service.
  • To consult with a KILZ Certified Coatings Professional, call 1-866-PRIMER-1 (U.S.A. only).

Read More

Read More

WARRANTY

For one year from the date of purchase, Masterchem Industries LLC warrants to the original residential consumer purchaser (1) that the product meets Masterchem Industries LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event that this product proves to be defective within one year from the date of purchase, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: techservice@masterchem.com. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot